Mozzafiato CRONOMETRO R

Features taken directly from our commercial espresso machine range give the Cronometro machines superior technology that is normally only found in full-sized commercial espresso machines.

Now with a digital shot timer, PID temperature control, insulated boilers, and the Rocket Espresso 9 mm boiler end plates, stability and temperature control are further enhanced.

The use of a rotary pump ensures quiet yet robust pump performance and allows the user to have the machine draw water from the internal machine reservoir or alternatively connect the machine directly to the water supply.

The Cronometro machines are offered in two different body styles, the Giotto or the Mozzafiato.

What is PID? - The Basics:

If you've been following along with us, you probably know that temperature is extremely important to brewing coffee. While different brew methods and roasts demand different temps, stability is key. PID controllers help ensure that stability. Machines without these devices often use a simple thermostat that isn't as accurate as a PID controller. By comparison, a machine with PID control monitors itself to ensure temperature stability and control.

PID stands for Proportional-Integral-Derivative. Quite a mouthful! On a basic level, a PID controller uses the PID algorithm to determine the best way to control whatever process it's used for. PID controllers are used in a wide range of industrial applications, in our case, it controls the temperature in your espresso machine!

A traditional thermostat has a tendency to hit the desired temp, then turn off the heating element as the temp rises above its target. Then it'll kick back on as the temperature falls below the target. This results in uneven temperatures that can result in inconsistent shot quality in an espresso machine. There are ways to mitigate this with many machines, but it often means learning how to ride the temperature wave with your specific machine. This may require timing the heat-up time precisely or running water through the group head before pulling a shot.

PID controllers use the PID algorithm to keep your machine at the proper brew temperature. This also means that you can directly control the temperature of the machine. While not true in every case, PID controllers are usually visible on the machine. They also usually feature control buttons to increase or decrease the brewing temperature. While this won't matter for most, for some home baristas, experimenting with different roasts and temps is key!

CRONOMETRO R technical specifications available HERE

No problem!

✅We'd be only too happy to provide you with a quotation in order for payment to be made via EFT👍

✅Kindly request a quote by clicking on the "Request a Quote on this Item" button below & we'll get a quote off to you ASAP.

This item is typically dispatched within 24 hours of the order having been finalised, although the Shipping period may vary depending on National stock availability. Kindly confirm the shipping period & stock availabilty before placing your order online.

Certain machines are imported on orer only.

• FREE* Shipping for orders of R5000.00 or more within the borders of South Africa
  *On Selected Machines Only

All prices are subject to exchange rate fluctuations & may change without notice E&OE

Please confirm current pricing before placing your order.

Water filtration (If Applicable) may be required in terms of equipment warranty on certain machines.

Installation (If Applicable - may be required on certain machines) is excluded unless otherwise stated

Warranty Policy

This Warranty Policy forms part of the Blackbeancoffee.africa Terms & Conditions (the “Terms”) and must be read together with them. In the event of any inconsistency, the Terms & Conditions shall prevail.

1. General Warranty Position

• All equipment supplied is sold new. We do not sell used or reconditioned equipment.
• As authorised and accredited resellers of the brands we retail, all products are covered by the applicable manufacturer’s and/or distributor’s warranties.
• Unless otherwise stated, machines and equipment are supplied with a standard 12-month carry-in warranty, valid from the date of delivery.
• A 12-month manufacturer’s carry-in warranty means:
  • The manufacturer provides warranty cover for 12 months from the date of purchase or delivery
  • The customer is responsible for taking (carrying in) or couriering the product to an authorised manufacturer or distributor service centre
  • The warranty covers manufacturing defects only, not misuse, wear-and-tear, or accidental damage
  • If a valid defect is found, the manufacturer will repair or replace the part/product (at their discretion)

2. Warranty Administration & Service Agents

• All warranties, spare parts, repairs, and technical services are honoured exclusively by supplier-appointed and authorised service agents.
• Blackbeancoffee.africa does not perform warranty repairs and is not a technical service provider for the equipment sold. We will facilitate where possible.
• All technical or warranty-related matters are referred directly to the relevant brand supplier’s technical support team for specialist assessment and assistance.

3. Service Agent Coverage & Location

• Supplier-appointed service agents are typically located in major centres such as Johannesburg, Pretoria, Cape Town, and Durban, as well as selected regional centres.
• Coverage in outlying or remote areas may be limited.
• Where on-site support is not available due to distance, and telephonic support is insufficient, customers located more than 40 km from the nearest authorised service centre may be required to deliver or courier the equipment to the nearest appointed service agent for assessment.

4. Consumer Protection Act (CPA) – Defective Goods

• Where goods fail to comply with the Consumer Protection Act, 2008 or show a manufacturing defect, we will repair, replace, or take back the goods, subject to confirmation of the defect by the supplier. The supplier assessment will be final.
• The defect must be reported within 24 hours of becoming apparent.
• The defect must result from faulty design or manufacture.
• Goods may be required to be returned to the supplier or an authorised service agent for inspection and confirmation.

If the supplier confirms a defect:

• The cost of return carriage will be refunded; and
• The goods will be repaired or replaced at no charge.

If goods are repaired or replaced, no additional claim may be made against us under statute, common law, or otherwise in respect of the defect.

5. Installation, Use & Maintenance Requirements

• Customers must strictly adhere to the manufacturer’s recommended installation, operation, and maintenance procedures.
• Compliance with these requirements is essential to ensure optimal performance, reliability, longevity, and continued warranty validity.
• Only authorised service agents may work on equipment during the warranty period.

6. Warranty Exclusions

Warranty coverage may be rendered null and void if:

• Unauthorised repairs, modifications, or interventions are performed;
• The equipment is installed or used contrary to manufacturer specifications;
• Maintenance guidelines are not followed;
• Damage results from misuse, neglect, incorrect installation, power issues, water quality issues, or external factors outside of manufacturer control.

7. Out-of-Box Failure

• As we ship directly from suppliers and do not hold stock, out-of-box failures are handled via supplier assessment.
• In such cases, equipment may be collected and returned to the supplier or you may be directed to the nearest authorised service agent.
• If a fault is confirmed, the supplier will dispatch a replacement unit directly to the customer.
• This process may take up to 10 working days & is subject to stock availability.
• We do not provide loan or temporary replacement units.

8. Customer Responsibilities

• Ensure equipment is installed and operated in accordance with manufacturer instructions.
• Report faults promptly and accurately.
• Provide access to equipment or arrange delivery to authorised service agents where required.

9. Relationship to Other Policies

This Warranty Policy must be read together with the Returns & Refunds Policy, Shipping Policy, and Price & Payment Policy, all of which are derived from and aligned to the Terms & Conditions.

10. Contact

All warranty-related queries may be directed to:
info@blackbeancoffee.africa