Skip to product information
1 of 2

ECM | Synchronika II Dual Boiler System with Rotary Pump Espresso Machine

ECM | Synchronika II Dual Boiler System with Rotary Pump Espresso Machine

Regular price R 103,500.00
Regular price Sale price R 103,500.00
Sale Sold out
Taxes included. Shipping calculated at checkout.
Prices exclude, if applicable: product training, water filtration, installation (area dependent within the borders of South Africa) and delivery, unless otherwise stated.
Commercial Use Machines: Specific to, but not limited to, 2Gr & 3Gr Traditional Espresso Machines: Installation must be done by a qualified technician to ensure warranty T&Cs.
Quantity

Product details and specifications

ECM Synchronika II – Dual Boiler Espresso Machine (Rotary Pump)

You set the highest standards – for yourself, for your home, and for your espresso machine. The ECM Synchronika II is the flagship of ECM’s range: a no-compromise, German-engineered dual boiler espresso machine built for absolute precision, speed and longevity. Designed for serious home baristas and prosumer users, it delivers café-quality performance with exceptional temperature stability, ultra-fast heat-up, and whisper-quiet operation.

As a true dual boiler system, the Synchronika II allows independent temperature control of the brew and steam boilers, ensuring ultimate flexibility and consistency. Thanks to additional heating cartridges integrated into the E61 brew group, the machine reaches brewing temperature in an astonishing approximately 6.5 minutes, with the full system ready in around 9–10 minutes.

Key highlights

  • Dual Boiler System – separate stainless steel boilers for brewing and steaming allow simultaneous operation with uncompromised temperature control.
  • Extremely fast heat-up – ready to brew in approx. 6.5 minutes thanks to additional group heating cartridges.
  • Quiet rotary pump – commercial-grade, low-noise performance with stable pressure delivery.
  • Discreet OLED PID display – clear, modern display combined with a convenient rotary control dial for intuitive navigation.
  • Independent boiler temperature control – fine-tune brew and steam temperatures individually.
  • Integrated shot timer & shot counter – automatic timing during extraction plus long-term usage tracking.
  • Active & passive pre-infusion modes – configurable to suit different coffees and extraction styles.
  • Automatic switch-on & switch-off times – programmable for each day of the week.
  • ECO mode & maintenance reminders – energy saving plus group cleaning notifications.
  • Switchable water source – operate via water tank or fixed water connection.

Design, build & ergonomics

  • E61 brew group with innovative stainless steel bell insert to improve thermal stability and resist scale build-up.
  • Professional lever-operated steam and hot water valves for precise, responsive control.
  • Large retro-style pressure gauges for boiler and pump pressure with excellent readability.
  • Polished stainless steel body paired with a powder-coated anthracite chassis for a striking, premium appearance.
  • Water tank with filter adapter designed to hold a water filter cartridge.
  • Two weight-balanced ECM portafilters with ergonomic grip and professional feel.

Technical specifications

System Dual Boiler system
Brew boiler volume Approx. 0.75 L (stainless steel)
Steam / hot water boiler volume Approx. 2.0 L (stainless steel)
Pump Low-noise rotary pump
Heat-up time Approx. 6.5 minutes to brewing temperature
Water source Water tank with filter adapter or fixed water connection (switchable)
Display & control OLED PID display with rotary control dial
Temperature control Independent PID control for both boilers
Pre-infusion Active and passive modes (programmable)
Timers & counters Integrated shot timer and shot counter
Energy & maintenance ECO mode, brew group cleaning reminder
Gauges Large retro-style boiler and pump pressure gauges

Who is the Synchronika II for?

  • Home baristas who want ultimate control and flexibility from a true dual boiler machine.
  • Users who value speed, silence and precision in daily use.
  • Those seeking a statement espresso machine with professional components, longevity and timeless design.

Note: For best results, pair the Synchronika II with a premium espresso grinder and properly filtered water.

Image Disclaimer:

The product images shown are correct as provided by the supplier/manufacturer at the time of publishing and may in rare instances differ slightly from the actual product if the manufacturer or supplier have updated the item model since the publication of the image provided on the website, or within any of the product catalogues. Some product images are shown inclusive of all optional extras & accessories which do not form part of the item advertised unless otherwise stated. BLACKBEANCOFFEE.AFRICA will issue an exact image upon request and if available from the supplier/manufacturer. BLACKBEANCOFFEE.AFRICA reserves the right to change product images at any time without notice. E&OE

Helpful resources: Traditional Espresso Machine Buying Guide · ECM Coffee Equipment

☕Prefer making payment via EFT?

No problem!

✅We'd be only too happy to provide you with a quotation in order for payment to be made via EFT👍

✅Kindly request a quote by clicking on the "Request a Quote on this Item" button below & we'll get a quote off to you ASAP.

Check Stock Availabilty

This item is typically dispatched within 24 hours of the order having been finalised, although the Shipping period may vary depending on National stock availability. Kindly confirm the shipping period & stock availabilty before placing your order online.

Certain machines are imported on orer only.

FREE Shipping

  • FREE* Shipping for orders of R5000.00 or more within the borders of South Africa
    *On Selected Machines Only

Prices

All prices are subject to exchange rate fluctuations & may change without notice E&OE

Please confirm current pricing before placing your order.

Water filtration (If Applicable) may be required in terms of equipment warranty on certain machines.

Installation (If Applicable - may be required on certain machines) is excluded unless otherwise stated

Product Guarantee/Warranty

Warranty Policy

This Warranty Policy forms part of the Blackbeancoffee.africa Terms & Conditions (the “Terms”) and must be read together with them. In the event of any inconsistency, the Terms & Conditions shall prevail.

1. General Warranty Position

  • All equipment supplied is sold new. We do not sell used or reconditioned equipment.
  • As authorised and accredited resellers of the brands we retail, all products are covered by the applicable manufacturer’s and/or distributor’s warranties.
  • Unless otherwise stated, machines and equipment are supplied with a standard 12-month carry-in warranty, valid from the date of delivery.
  • A 12-month manufacturer’s carry-in warranty means:
    • The manufacturer provides warranty cover for 12 months from the date of purchase or delivery
    • The customer is responsible for taking (carrying in) or couriering the product to an authorised manufacturer or distributor service centre
    • The warranty covers manufacturing defects only, not misuse, wear-and-tear, or accidental damage
    • If a valid defect is found, the manufacturer will repair or replace the part/product (at their discretion)

2. Warranty Administration & Service Agents

  • All warranties, spare parts, repairs, and technical services are honoured exclusively by supplier-appointed and authorised service agents.
  • Blackbeancoffee.africa does not perform warranty repairs and is not a technical service provider for the equipment sold. We will facilitate where possible.
  • All technical or warranty-related matters are referred directly to the relevant brand supplier’s technical support team for specialist assessment and assistance.
  • If, following inspection or assessment by an authorised service agent, it is determined that the reported issue is the result of user error, incorrect installation, misuse, maintenance failure, or any cause other than a manufacturing or material defect, the warranty claim will be declined and the customer will be liable for all applicable call-out fees, diagnostics, labour, parts, and repair costs, where applicable. The attending technician will bill directly for payment from the client.

3. Service Agent Coverage & Location

  • Supplier-appointed service agents are typically located in major centres such as Johannesburg, Pretoria & Cape Town, as well as selected regional centres.
  • Coverage in outlying or remote areas may be limited.
  • Where on-site support is not available, due to distance, and telephonic support is insufficient, customers located more than 50 km from the nearest authorised service centre may be required to deliver or courier the equipment to the nearest appointed service agent for assessment.

4. Consumer Protection Act (CPA) – Defective Goods

  • Where goods fail to comply with the Consumer Protection Act, 2008 or show a manufacturing defect, we will repair, replace, or take back the goods, subject to confirmation of the defect by the supplier. The supplier assessment will be final.
  • The defect must be reported within 24 hours of becoming apparent.
  • The defect must result from faulty design or manufacture.
  • Goods may be required to be returned to the supplier or an authorised service agent for inspection and confirmation.

If the supplier confirms a defect:

  • The cost of return carriage will be refunded; and
  • The goods will be repaired or replaced at no charge.

If goods are repaired or replaced, no additional claim may be made against us under statute, common law, or otherwise in respect of the defect.

5. Installation, Use & Maintenance Requirements

  • Customers must strictly adhere to the manufacturer’s recommended installation, operation, and maintenance procedures.
  • Compliance with these requirements is essential to ensure optimal performance, reliability, longevity, and continued warranty validity.
  • Only authorised service agents may work on equipment during the warranty period.

6. Warranty Exclusions

Warranty coverage may be rendered null and void if:

  • Unauthorised repairs, modifications, or interventions are performed;
  • The equipment is installed or used contrary to manufacturer specifications;
  • Maintenance guidelines are not followed;
  • Damage results from misuse, neglect, incorrect installation, power issues, water quality issues, or external factors outside of manufacturer control.

7. Out-of-Box Failure

  • As we ship directly from suppliers and do not hold stock, out-of-box failures are handled via supplier assessment.
  • In such cases, equipment may be collected and returned to the supplier or you may be directed to the nearest authorised service agent.
  • If a fault is confirmed, the supplier will dispatch a replacement unit directly to the customer.
  • This process may take up to 10 working days & is subject to stock availability.
  • We do not provide loan or temporary replacement units.

8. Customer Responsibilities

  • Ensure equipment is installed and operated in accordance with manufacturer instructions.
  • Report faults promptly and accurately.
  • Provide access to equipment or arrange delivery to authorised service agents where required.

9. Relationship to Other Policies

This Warranty Policy must be read together with the Returns & Refunds Policy, Shipping Policy, and Price & Payment Policy, all of which are derived from and aligned to the Terms & Conditions.

10. Contact

All warranty-related queries may be directed to:
info@blackbeancoffee.africa

View full details

Why Choose BlackBeanCoffee

Premium coffee equipment backed by expert advice and dependable support.

Authorised Retailer

Genuine products backed by manufacturer warranties.

Nationwide Delivery

Reliable delivery across South Africa with clear updates.

Expert Advice

Helping you choose the right coffee solution.

After-Sales Support

Support before, during and after your purchase.